b.吊装作业现场条件和环境特点；c.吊装作业人员资质、素质、身体状况要

b.吊装作业现场条件和环境特点；
c.吊装作业人员资质、素质、身体状况要求；
d.作业安全防护技术；
e.必须佩带的防护用品和正确的使用方法；
f.紧急情况应急措施。
4.6吊装作业人员应按技术、安全交底的要求落实安全防护措施，熟悉吊装作业操作规程。特别是起重工应明确吊装物的重量、形状、吊点的确定、钢丝绳等吊装索具的选用、绑扎技术、吊装机械目前的性能、工况等。
4.7吊装作业人员应严格按照操作规程进行操作，并严格遵守以下规定：
4.7.1物料吊装运输必须严格遵守施工现场各项相关规章制度和要求。
4.7.2物料吊装运输中所使用的设备、车辆及器材（绳索、卡扣、吊钩等）必须是经检验确认合格的。
4.7.3物料吊装运输工作必须在调度的统一安排下进行。
4.7.4物料吊装必须由专职起重工统一指挥。
4.7.5参加吊装运输的所有人员（吊车司机、装卸工等）吊装时必须听从起重人员的指挥。
4.7.6在吊装指挥中，起重工必须着装标志服。
4.7.7物料吊装时，必须在吊车的性能和负荷规定范围内进行，不得超重、超距强行吊装。对不符合安全吊装的指令，吊车司机有权拒绝吊装。
4.7.8吊装的物件必须要捆扎牢靠，吊装要平稳，物料摆放要稳固。
4.7.9车辆装载物料时，凡堆放在两层或两层以上或车辆运输时可能发生滚落的必须进行封车。
4.7.10物料装载必须符合相关规定和要求，不得超载。

ผลลัพธ์ (อังกฤษ) 1:

B. lifting operations site conditions and environmental characteristics;C. lifting operations personnel qualifications, quality and health requirements;D. job security protection technology;E. must wear protective equipment, and the right to use them;F. emergency response measures.4.6 lifting operations personnel should be technology, safe disclosure requirements to implement security measures, familiar with the lifting operation. Rigger in particular should be clear of lifting weight, shape, hanging point of identification, selection of wire rope lifting slings, lashing technology, hoisting machinery, current performance, operating conditions, and so on.4.7-lifting operations personnel should operate strictly in accordance with the rules and strict compliance with the following provisions:4.7.1 material lifting and transport must be in strict compliance with the relevant rules and regulations and construction site requirements.4.7.2 material lifting equipment, used in the transport of vehicles and equipment (rope, clips, hooks, and so on) must be tested and qualified.4.7.3 materials transported under the unified arrangements of the work must be scheduled.4.7.4 material lifting must be performed by professional Riggers unity of command.4.7.5 all personnel participating in the lifting and transport (crane operator, stevedores, etc) must follow the lifting of command when lifting.4.7.6 installation command, Riggers must wear flag clothing.4.7.7 hoisting of materials, must be within the range of crane performance and load requirements, not overweight and forcibly lifting at a distance. Does not meet the safety and installation instructions, the crane operator has the right to refuse lifting.4.7.8 lifting objects have to be tied firmly, lifting a smooth, put the materials you want to firm.4.7.9 vehicle when loading, where stacked in two or more layers or tumbling may occur during transportation of the vehicle must be sealed.4.7.10 load must comply with the relevant provisions and requirements of material, shall not be overloaded.

ผลลัพธ์ (อังกฤษ) 2:

b. lifting job site conditions and environmental characteristics;
. C qualification lifting operations personnel, quality, health requirements;
D. Job security technology;
E. protective equipment and proper use must be worn;
. F. Emergency Response Measures.
4.6 lifting operations personnel shall be technical, safety tests, requirements for the implementation of security measures, procedures familiar with lifting operations. Especially rigger should clearly was lifting the weight, shape, lifting point determination, etc. hoisting rope rigging selection, binding technology, the current performance of the hoisting machinery, working conditions and so on.
4.7 lifting operations personnel should operate in strict accordance with the rules and strictly comply with the following requirements:
4.7.1 Material lifting and transportation must strictly abide by the relevant regulations and the construction site requirements.
4.7.2 Equipment Material used in the lifting and transportation vehicles and equipment (ropes, snap, hook, etc.) must be confirmed by the test qualified.
4.7.3 Material lifting and transportation work must be carried out under the unified arrangement schedule.
4.7.4 Material lifting must be unified command of the full-time rigger.
4.7.5 All personnel (crane drivers, stevedores, etc.) participate in the lifting and transportation personnel must obey the command of lifting when lifting.
4.7.6 In lifting command, the rigger must dress signs clothes.
4.7.7 When hoisting material, must be within a predetermined range of performance and load the crane was not be overweight, a distance lifting force. Do not meet the safety instructions lifting, crane operator the right to refuse lifting.
4.7.8 Lifting items must be securely tying, lifting to smooth, solid material to be placed.
4.7.9 Vehicle loading material, all stacked in two or more layers may occur during transport or vehicle rolled down the car must be sealed.
4.7.10 material loading must comply with the relevant regulations and requirements, can not be overloaded.