系统文件、驱动文件的备份及还原注意事项1、E盘或D盘中的GHOST8为

系统文件、驱动文件的备份及还原注意事项

1、E盘或D盘中的GHOST8为系统备份和还原软件。
2、MPC02文件夹中的内容为运动卡的驱动、运动卡函数库和演示程序。注意手动安装时选择MPC02
3、UA204文件夹为A/D卡的驱动及演示程序。
4、VB6文件夹为VB6的软件。
5、System_save是C盘的备份文件（系统损坏以后再DOS中使用GHOST8软件然后选中System_save后可以还原系统。）
6、主板驱动
7、BUMDB文件夹为动平衡软件，如果需要做系统还原，请以此文件夹中的程序为主。（即把此文件夹拷贝到C盘中覆盖掉原来的文件）



上海北友机械设备有限公司

ผลลัพธ์ (อังกฤษ) 1:

System files, drivers, file backup and restore considerations for GHOST8

1, e or d disk backup and restore software for your system.
2, the contents of the MPC02 folder to the driving, sports card sports card library and demonstration program. Select MPC02
3, UA204 folder Note When you manually install a/d card drive and demo.
4, VB6 VB6 folder software.
5, System_save is the c drive backup files (system corruption DOS using GHOST8 software and then again later System_save is selected, you can restore the system. )
6, motherboard driver
7, BUMDB folder for dynamic balance of software, if you need to do a system restore,Please refer to the procedures contained in this folder. (That is, to copy this folder to overwrite the original files in the c drive)



North Shanghai machinery equipment co

ผลลัพธ์ (อังกฤษ) 2:

System files, backup and restore attention to matters of the driver file 1, E or D disk GHOST8 for system backup and restore software. 2, MPC02 folder contents for sports card driver, sports cards libraries and demonstration program. Note that when you choose to manually install MPC02 3, UA204 folder for the A / D card driver and demo program. 4, VB6 folder for VB6 software. 5, System_save is C disk backup file (later re-DOS system damage GHOST8 software can then be used to restore the system after the selected System_save.) 6, motherboard drivers 7, BUMDB folder for balancing software, if you need to do system restore, to This folder in the main program. (That is, to this folder are copied to the C disk overwrite the original file) Machinery Co., Ltd. Shanghai North Friends

ผลลัพธ์ (อังกฤษ) 3:

The backup and return to original state of matters needing attention

1 and GHOST8 in E plate or D plate the system file and actuation document is the system backup and return to original state software.
2 and content in MPC02 folder is the actuation and movement card of functional library and demonstration program movement card. When pays attention to the manual installment chooses MPC02
3 and UA204 folder is the actuation and demonstration program of A/D card.
4 and VB6 folder is the VB6 software.
5 and System_save are the duplicate files of C plate (after system failure, after DOS uses again the GHOST8 software then selects System_save, can reduction system.)
6 and motherboard actuate
7 and BUMDB folder for the transient equilibrium software, if needs to make the system return to original state,Please be primarily the procedure in this folder. (I.e. covers original document to the C plate in this folder copy)



Shanghai north friend mechanical device LLC