1.将零件从物料盒取出，放入保险丝折脚凹槽治具内，2.将零件PIN脚沿

1.将零件从物料盒取出，放入保险丝折脚凹槽治具内，2.将零件PIN脚沿着治具边折脚，3.用剪钳从治具下端，沿着治具底部将多余的PIN脚减掉4.剪脚PIN脚长4.0±0.3mm

ผลลัพธ์ (อังกฤษ) 1:

1. Take the part out of the material box and put it into the fuse folding foot groove fixture. 2. Fold the PIN foot of the part along the edge of the fixture. 3. Use scissors to cut the PIN pin from the lower end of the fixture along the bottom of the fixture. Remove 4 excess PIN feet . Cut the PIN feet to a length of 4.0±0.3mm.

ผลลัพธ์ (อังกฤษ) 2:

1. Take the parts out of the material box and place them in the fuse foot groove fixture,
2. Fold the PIN pin of the part along the edge of the fixture,
3. Use scissors to remove excess PIN pins from the bottom of the fixture along the bottom of the fixture
4. PIN pin with a length of 4.0 ± 0.3mm

ผลลัพธ์ (อังกฤษ) 3:

1. Take the parts out of the material box and put them into the groove fixture of the fuse leg.
2. Fold the PIN foot of the part along the edge of the fixture,
3. Use scissors to cut off the extra PIN feet from the lower end of the fixture and along the bottom of the fixture.
4. The PIN leg length of the scissor leg is 4.0±0.3mm